CE 6851基本配置 交换机堆叠 A交换机 stack stack member 1 domain 10 stack member 1 priority 150 interface Stack-Port1/1 port member-group interface 40GE 1/0/5 to 1/0/6 Warning: After the configuration is complete, 1.The interface(s) (40GE1/0/5-1/0/6) will be converted to stack mode and be configured with the port crc-statistics trigger error-down command if the configuration does not exist. 2.The interface(s) may go Error-Down (crc-statistics) because there is no shutdown configuration on the interfaces.Continue? [Y/N]: 提示选择 N 把堆叠线插到A交换机上，切记先不要插B交换机 重启 reboot B交换机 stack stack member 1 domain 10 stack member 1 renumber 2 inherit-config Warning: The stack configuration of member ID 1 will be inherited to member ID 2 after the device resets. Continue? [Y/N]: 提示选择Y interface Stack-Port1/1 port member-group interface 40GE 1/0/5 to 1/0/6 Warning: After the configuration is complete, 1.The interface(s) (40GE1/0/5-1/0/6) will be converted to stack mode and be configured with the port crc-statistics trigger error-down command if the configuration does not exist. 2.The interface(s) may go Error-Down (crc-statistics) because there is no shutdown configuration on the interfaces.Continue? [Y/N]: 提示选择 N 重启 reboot Warning: The current configuration will be saved to the next startup saved-configuration file. Continue? [Y/N]: 选择 Y 大约重启1分钟，这个时候把A交换机的堆叠线接到B交换机 B交换机启动机器后就会同步完成2个交换机的数据，堆叠完成。
转载请注明本文链接：https://blog.weixiaoline.com/523.html